Forex for a trader
Strategy forex filetype pdf

Strategy forex filetype pdfForex Trading Strategy: The Ultimate Guide (2018 Update) Do you want to master Forex trading? Well it all starts with having the right strategy! Trading Forex using price action is simple, stress free, and highly effective. In this guide I will share my advanced Forex trading strategy with you. You will learn to use powerful price action techniques in a stress free and simple Forex trading strategy. Don’t have time to read this article right now? I will send you a ebook version that you can read offline whenever you want. Just let me know what email to send it to. Almost there! Create an account by completing the form below. Forex Price Action Strategy. The Story of Price. Price Action Setups.

Chapter 1: My Price Action Trading Strategy. My Forex trading strategy is based completely on price action, no indicators, no confusing techniques, just pure price action! What is Price Action Trading? All price movement in Forex comes from bulls (buyers) and bears (sellers). When GBPUSD moves up it’s because there are more bulls than bears and vice versa. The Forex market (and any market for that matter) is in a constant state of struggle between bulls and bears. Price action trading is about analysing who currently controls price, bulls or bears and if they are likely to stay in control. If your analysis shows that bulls are in control and that they are likely to stay in control, then you can buy (long). If it shows that bears are in control and that they are likely to stay in control, then you can sell (short). How do you analyse who’s in control of price? By using two simple price action techniques. Support and Resistance Areas. These are buy and sell areas you can easily identify and place on your chart.

Once price hits these areas you know it is likely to stall or reverse completely. This allows you to buy or sell at the right time. Advanced candlestick analysis. This is not that basic doji equals reversal stuff you may have seen elsewhere. Advanced candlestick analysis goes much deeper than that so that you have a full understanding of what a chart is telling you. Once you understand this, one glance at a chart will tell you who’s in control of price (bulls or bears) and if you should buy or sell. These two techniques make up the core of my price action trading strategy. In fact, those are the only techniques I use to find and trade high probability setups. My trading strategy differs from most courses you will come across as it is based entirely on Price Action… There are NO indicators. There are NO confusing techniques. There is NO stress. It’s simply about reading price and making smart trading decisions. Forex Price Action Strategy. My Forex price action strategy was born in 2005 and has been constantly improved over the last 12 years – this strategy has seen it all. It has survived major market changes from the financial crisis in 2008 to the Swiss Franc disaster in 2014, to Brexit in 2016. It really has seen it all. My price action strategy works in all market conditions .

From trending markets to low volatility, to ranging, to high volatility, it has weathered it all with consistent profits. Indicator based strategies work well in specific market conditions. If you have a strategy that works in low volatility markets, it will fail in high volatility, ranging, or trending market conditions. Price action adapts, indicators don’t! Price action doesn’t only adapt to changing market conditions though, it adapts to different pairs, different time frames and, crucially, to different traders. Above all, Price Action keeps your trading simple . In fact, my Forex trading strategy is so simple that you can trade it from your smartphone. I use this strategy to trade on the go – as of 2017 I take over 70% of my trades from my smartphone. My Forex trading strategy was created with simplicity in mind. The most common downfall of today’s traders is over complicating their strategy. We have all seen charts that look like this. How can you trade comfortably using a chart like this? How can you trade efficiently using a chart like this? How can you trade from your smartphone using a chart like this? You can’t, it is too messy. The core rule of my price action strategy is to keep trading simple.

Because the Forex trading strategies that work best are simple . The only thing I place on my charts is support and resistance areas . I use these support and resistance areas in conjunction with candlestick analysis to trade Forex. So what does a clean Forex chart look like? Much better than the monstrosity above! This chart is uncluttered, easy to understand and to navigate, with nothing to distract you from analysing price action. This style of trading is quick, efficient, stress-free, and you can do it from anywhere, including your smartphone. So if you want a simple Forex strategy, keep reading. Chapter 2: Support & Resistance Areas. Support and resistance areas show you where to buy and sell, they are a vital part of every traders toolkit, and it is essential that you learn how to place them .

What is Support and Resistance? Placing support and resistance areas is the most important skill you can master in trading. And placing them is easy. Support and resistance areas divide your chart up into buy and sell areas. An area that sits above current price is a sell area, any area below current price is a buy area. The terms buyers and bulls are interchangeable. Support is a buy area as buyers are found at support. Resistance = Sell Area. The terms sellers and bears are interchangeable.

Resistance is a sell area as sellers are found at resistance. On the GBPUSD chart below, you can see price is approaching the blue shaded area at 1.3500. This is a strong resistance (sell) area. When price approaches a sell area large amounts of sell orders are triggered countering buy orders. This usually results in price stalling or even turning around completely for a reversal. Why does this happen though? It’s simple, the market movers like banks and hedge funds place their orders at areas of support and resistance. Why Do Market Movers Place Their Orders At SR? Good traders don’t randomly place entry orders and hope that they get lucky. They place their entry orders at significant price levels. Significant levels come in many forms. Yearly, monthly, weekly highs or lows. Rounded numbers such at 1.0000 and 1.0500 (also called psychological levels) All time highs or lows. Areas in which price has stalled or reversed more than once.

In the GBPUSD chart example above, we can see that price has stalled at the 1.3070 twice (green highlights). The next time it approaches the level it pulls back again and then again two more times (yellow highlights). Because market movers place their buy orders at the 1.3070 and when price hits the area the buys trigger causing a reversal. This happens all the time on every Forex pair and in every financial market for that matter. This is how markets work, buy and sell orders are grouped together in the same general area and when they are hit we see the impact on price. Placing Support and Resistance Areas. There are a lot of indicators out there that claim to give you great support and resistance areas. I have tried them all and I do not find them reliable. Support and resistance placements still need to be done by a person. These are my support and resistance areas, but if you want to trade more pairs you will need to place them yourself. A good Forex trading strategy requires some work! But don’t worry, it is easy, all you are doing is placing horizontal lines when you spot an area with two or more bounces. I am going to break it down into a step by step process for you though. But first, we need to define some rules for support and resistance areas.

Three Rules to Support and Resistance. There are three key rules you need to keep in mind when placing support and resistance areas. Place areas on the body of a candle, the body is more important than the wick. The more recent the bounce the more important. Prioritise recent bounces over older bounces. You need at least two connecting bounces to place a support and resistance area. There are a few exceptions to this, the most common one being for points which are yearly or all-time highslows. When you spot a year or all-time highlow you can place an area there even if it has only once bounce. Step By Step Guide to Placing Support and Resistance. Step 1: Select a daily chart and zoom out until you see around one year of data. Don’t worry if you see a little more or less than one year, it’s not a big deal. Step 2: Identify the highest and lowest bounces in the last year and place an area at each.

Remember, place your areas at the bodies, not the wicks and as these are yearly highs and lows placing them based on a single bounce is enough. Step 3: Place support and resistance areas between the first two by connecting areas which have two or more bounces. You will generally find that there are 5-8 support and resistance areas on most charts. If you have more than 8 you probably placed too many. Chapter 3: Advanced Candlestick Analysis. Most new traders learn a little bit about candlestick analysis. But most of what they learn is completely useless! Well the standard approach to candlestick analysis is basic pattern recognition, which fails to work in real trading. I delve much deeper than that, I look at the story behind the candle and in this chapter I will show you how to do that too. You can’t skip straight to advanced candlestick analysis without knowing some basics first. If you don’t know the basics, that’s fine, I got you covered!

The Truth About Candlestick Analysis. When Forex traders first start out they usually learn about candlesticks. But what they learn is usually useless. They normally see a list of “candle patterns” like the one below. Each pattern has a set in stone definition and that is the only meaning it can have. This is not candlestick analysis, it is pattern recognition. And for a price action trader, it is useless. Actually, it is worse than useless. Thinking about candles as just patterns is counterproductive. It makes you a worse trader, it leads you to make massive mistakes.

Giving a pattern a set definition leads to tunnel vision. When you see that specific pattern, you assume that something will happen. But that is not how candlesticks work. All candlesticks need to be assessed based on the candlesticks around them, and many other factors. Below is a candlestick pattern commonly called a “spinning top”. Normally people say that a spinning top means a reversal is imminent, which can be true. However, this same pattern can also mean that a continuation is imminent. It can mean that price is temporarily stalling. It can mean a lot of different things. Thinking of candles as simple patterns is the wrong way to do things. You need to look beyond the pattern and read the story of price. Every single candle on your chart is telling you a story. When you combine those candles together, you get the story of price. The foundation of my Forex trading strategy is reading and understanding the story of price. Reading and understanding the story of price is vital in Forex. It is vital because it allows you to answer one of the most important questions in trading…

Who is in control of price? This question has three possible answers: buyers, sellers, or neither. Being able to accurately answer this question is vital. If you are about to enter a short trade and you ask yourself. “Who is in control of price?” and your answer is “buyers”, well perhaps selling is not a great idea. Let’s break down the story of price. If you look at the three highlighted candles below, it is easy to conclude that sellers are in control of price. The candles all closed lower than they opened, they all created new lows beyond the previous candles low and they all had small upper wicks in comparison to the candle body. The small upper wicks indicate that buyers were unable to push price up by much. But what does the highlighted candle in the next chart tell us? It has a short upper wick, a small body, and a long lower wick.

This is what I call an indecision candle. What’s an Indecision Candle? Indecision candles occur when neither buyers or sellers can gain and maintain control of price. They are common, but if used in the right way, they can be very powerful. Take a look at this bullish trend (yellow highlight), it is a strong trend, there are several bullish candles heading towards an area of resistance. The big bullish candles tell us that during the highlighted period buyers were in complete control of price. When price hits resistance we get an indecision candle forming (green highlight). Let’s break this candle down into a story so you understand why it indicates indecision. Large Upper Wick (Blue Highlight) A large upper wick shows that buyers tried to continue the bullish trend but failed. Sellers took control of price and pushed it down. Small Bearish Body (Green Highlight) The small bearish body shows that sellers were able to close lower than the open. This is significant because in the three candles before this price consistently closed higher than open. This shows us that buyers are losing power. Small Lower Wick (Red Highlight) The small lower wick shows us that sellers were not able to gain much ground either. This tells us that sellers are not strong enough to turn price around completely.

However, they are strong enough to stall further buyer movement. All together this indecision candle forming right after strong bullish candles suggests that power has shifted from a decidedly bullish (buyer) market to an undecided market. While sellers are not in control, neither are buyers. But there is one more thing we need to look at… … The indecision candle is forming on top of a resistance area. Let’s looks at this chart again. If you remember, in the previous chapter we talked about resistance being a sell area and support being a buy area. So the image above shows us three strong bullish candles heading into a resistance area. And then… Price stalls and we get indecision forming on top of that area. This tells us that the sell area is working. When price pushed into that area sell orders triggered and buyers could no longer continue up. That is the story of price for this chart. And this story gives us a nice little price action trade setup. Chapter 4: Setups With My Forex Trading Strategy. Price action allows you to take many different types of trades, reversals, continuations, range, swing, breakout and scalp trades to name a few. In my free Forex trading strategy I will focus on one type of setup, the easiest to spot and trade, reversal . How to Spot a Reversal Trade.

Reversals occur quite often, but if you do not know what to look for, you cannot trade them. Reversals are one of the strongest price action setups, and one of the easiest to trade. And because they occur so often, you can trade this setup exclusively and be a profitable trader. In fact, for years Forex trading strategy focussed on reversals only. However, these days I trade more price action setups. Reversal trades come in three parts: The preceding trend. The Indecision candle(s). The reversal trend. Let’s break down each of these parts. A preceding trend is a strong move by the bearsbulls heading into an area of supportresistance. In the example above, the preceding trend is a very strong bearish move, indicating that there are a lot of bears in the market and very few bulls. If bulls were strong then price would not be trending down. The preceding trend shows us that bears (sellers) have strong control of price and they are pushing price down into a support area. The opposite applies for a bullish preceding trend which would show bulls (buyers) trending towards resistance, as you see below.

A preceding trend can be formed by as little as one candle. If the candle is strong and covers a lot of price distance, I categorise it as a preceding trend for the purposes of reversal trading. The example below shows a single candle preceding tend. Preceding trends are pretty simple. As long as you see a strong move heading into an area of support or resistance, you can consider it a preceding trend. The Indecision Candle(s) A reversal setup will have one to three indecision candles. The indecision candles need to form on or near to the support and resistance area. If indecision does not form on or near to the area of support and resistance, it is not a valid reversal setup. Why does it need to be on a support and resistance area? An indecision candle in a bullish preceding trend indicates that buyers are possibly losing control, and sellers may be gaining control. In a bearish preceding trend it indicates that sellers are losing control and buyers may be gaining control. However, an indecision candle does not indicate that price will reverse with any degree of certainty. An indecision candle indicates only one thing… Indecision!

You cannot take a trade based solely on indecision. The image below shows indecision forming between support and resistance. If you were to enter reversal trades based solely on indecision, it wouldn’t work out too well… What about when a bullish preceding trend heads into an area of resistance (sell area) or a bearish trend into support (buy area) and indecision forms? Well, then we get the makings of a high probability reversal setup. But we cannot enter just yet, we need confirmation, which comes in at part three of a reversal setup. The reversal trend is the third and most important part of a reversal setup. This is where we make our profit! After a preceding trend stalls at support, and indecision forms, you often see a reversal trend. The image below shows a bearish reversal trend forming after indecision on resistance. In this case we saw a transition of power from a bullish preceding trend to a bearish reversal trend separated by a stall on resistance. Where do you enter the trade though? Let’s discuss that in the next chapter. Chapter 5: Trading Reversal Trades With My Strategy.

You know what a reversal trade looks like. You know that you need to enter after indecision and before the reversal trend. In this chapter I will show you how to use my Forex trading strategy to trade reversals profitably. Don’t worry, entering reversal trades at the right time is a lot easier than you may think. My Forex trading strategy was built on reversal trading. It has now expanded beyond just reversals, but reversal trading is where it all started. Over the years I have refined reversal trade entries into a simple step-by-step process. Entering trades does not need to be difficult – remember, my goal is to keep everything simple. Getting in at the Right Time. In the previous chapter I explained that a reversal comes in three parts. The preceding trend. The Indecision candle(s). The reversal trend. You need to enter the reversal trade after part two (indecision) closes, but before part three (reversal trend) completely takes off. Obviously if you enter after the reversal trend takes off, it is too late. You also need to make sure you do not enter too early as you could be entering a false setup. In the image below you see a preceding trend heading into support, indecision, and a failed reversal trend.

If you entered too early, you would have failed this trade. Failed trades happen, there is nothing you can do about them. But getting in at the right time lowers your percentage of failed trades. Many people wait for a candle close to get in, but I have tested this thoroughly and waiting for closes gets you in too late. In the image below you can see the first candle in the reversal trend closing far from support. This means you miss out on a lot of potential profit, which is obviously not good. The key to reversal trading, or any trading for that matter is getting in at the right time . So, how do you do that? How to Enter Reversal Trade. I have tested countless entry methods in the last 15 years. In that time I have found three awesome entry strategies: entering on new highlow, retrace entries, and distance entries. In my free strategy I will teach you the easiest, entering on new highslows. When indecision forms on an area of support or resistance, you can use the high or low of the indecision candle as an entry trigger and as a stop loss.

In the image above indecision has formed on resistance after a bullish preceding trend, so we want to enter a short reversal trade. We set our entry a few pips below the low of the indecision candle, and our stop loss a few pips above the highest point of the candle. In trading, highs and lows are very important. If a new low is created from resistance it indicates sellers have taken control of price, which means we want to be short. Our stop loss sits above the high as a break of that high would indicate buyers have regained control of price. For long trades you set your entry a few pips above the high of indecision, and a few pips below the low. This is the most simple form of trade entry, but also one of the most effective. Now that you know how to enter, you need to know where to set your target. Where to Set Your Target. Targets are also very easy, you need to make sure your target comes before major barriers like the next area of support or resistance. So, if you enter a long reversal from support, make sure that your target is before the next resistance area. The minimum risk to reward ratio I use is 1:1.5 R. This means that my target has to be a minimum of 1.5 times the size of my stop. If my stop is 100 pips, the minimum size of my target is 150 pips (1.5 x 100). If my stop is 75 pips, the minimum size of my target is 112.5 pips (1.5 x 75). If there is a major barrier like the next support and resistance area in the way of my minimum target I skip the trade.

In the image above the support area is before my minimum target of 1.5 R is met so I skip the trade. What Pairs and Timeframes With The Forex Trading Strategy? The last thing you need to know is the pairs and timeframes. This strategy works on every single Forex pair, and it also works in other markets like cryptocurrencies, options, futures, stocks and everything. I trade around 10 pairs regularly. However, I often have extra pairs on my list that I monitor. If you want to see what I am currently watching check out my weekly analysis on YouTube. As for time frames, I currently trade these. Many people do not have access to the 6, 8 and 12 hour time frames because their broker doesn’t support it. The general rule in trading is the more time frames you trade the more trades you find.

If your broker does not support 6, 8 and 12 hour time frames you need to find a broker who does, or simply use a charting platform separate to your broker. While this strategy can be traded with just the 4 hour and daily time frames, there is absolutely no sense in sacrificing potential trades because your broker is too outdated to provide new time frames. Chapter 6: Learn More About My Forex Trading Strategy. If you want to get my latest analysis, or want to learn more price action setups, I got you covered. Every Monday I do weekly analysis using my price action strategy. You can check it out on my YouTube channel. If you want a more in-depth guide to my Forex trading strategy you can check out Forex Mastermind. In my course, I expand on this strategy, and I also share different price action strategies. Learn My Forex Scalping Strategy.

While the strategy above is an awesome day trading strategy and even a swing trading strategy, for scalping you will need a different approach. In this article, I share my Forex Scalping Strategy. Forex Training Group. The Keltner channel indicator belongs to a family of technical analysis tools called envelop indicators. Envelop indicators like Keltner channel uses one lower band and one upper band to create a dynamic channel around the price range of a financial instrument. Regardless of whether the asset is trading upwards, downwards, or sideways, envelop indicators can help define upper resistance and lower support levels. A Keltner bands strategy can be a very powerful part of a technical trader’s arsenal. However, knowing how to use a Keltner channel trading strategy appropriately based on the asset’s price action and market context is the key to developing a successful Keltner band trading strategy. Before we dive into explaining the inner workings of a Keltner channel trading system and discuss how to use Keltner channels, you should learn the basics of how to read any envelop based technical indicator first. Unless you fully understand the variables behind a technical indicator, you will not be able to fully comprehend what types of market conditions the indicator can work best in or how to apply the indicator to fit your trading strategy. Understanding the Keltner Channel Formula.

Keltner channel was introduced to the trading arena by a technical analyst named Chester W. Keltner, who first described the indicator in his book How to Make Money in Commodities, which was published in 1960. He initially used 10-day Keltner moving average bands to calculate the middle band of the Keltner channel instead of the modern variety that uses a 20-period exponential moving average in the Keltner channel settings. In fact, the modern variety of Keltner channel, found as a built-in technical indicator in popular charting software, is the brainchild of world-renowned commodities and futures trader, Linda Bradford Raschke, who is the Founder and President of money management firm LBRGroup, Inc. The Keltner channel calculation could be easily summarized with the following formula: Middle Band = 20-Period Exponential Moving Average Value. Upper Channel = 20-Period Exponential Moving Average Value + Multiplied Value of Average True Range. Lower Channel = 20-Period Exponential Moving Average Value + Multiplied Value of Average True Range. You see, the current version of the Keltner channel is comprised by combining two separate technical indicators. The first component of the Keltner channel is a 20-period exponential moving average, which acts as the middle band. The second element of the Keltner channel is a multiplied value of the Average True Range (ATR) indicator, which is commonly set at a value of 2. This means that the upper and lower channels are always at a 2x ATR distance from the 20-period Exponential Moving Average middle band. Unlike simple moving average (SMA), the Exponential Moving Average emphasizes recent price movement. Since the Exponential Moving Average reacts faster to the changing directional movement of the price, the Keltner channel can provide an accurate overall direction of the trend by smoothing the price action. As you can imagine, the more volatile a Forex pair is, the wider the upper and lower channels will appear from the middle band. Therefore, experienced Forex traders often change the default Exponential Moving Average period of the Keltner channel and set it within the range of 10 to 40 to best match the currency pair’s historical price action characteristics. In contrast, the Average True Range indicator measures the “average volatility” of the Forex pair based on a predefined number of periods, where the default look back timeframe is often set at the last 14-periods.

However, depending on the charting software and availability of indicator settings, you can also change the ATR look back period in order to tweak the Keltner channel indicator further, since the price action and volatility of each Forex pair is unique. Hence, you can make minor tweaks in its settings to fit a particular currency pair. However, most beginning and novice traders should stick to using the default Keltner channel settings until they have gained sufficient experience trading with Keltner channels. Interpreting Envelop Based Technical Indicator Signals Like Keltner Channel. Besides the Keltner channel, several other popular technical indicators fit the description of envelop based indicators. For example, the Bollinger Band indicator is another popular example in this family of trading indicators. The practical trading application of most envelop based indicators are quite similar, but depending on the particular indicator’s formula, the dynamic channels can represent a wide variety of interpretation of the asset’s price action. Figure 1: Keltner Channels and Bollinger Bands are Among the Most Popular Envelop Based Technical Indicators. For instance, while both Bollinger Bands and Keltner channels draw channels around the price range, the main difference between these two indicators is how the upper and lower, as well as the middle channel values are calculated. As demonstrated in Figure 1, the Bollinger Band indicator uses a 20-period simple moving average for the middle band and draws its channels or upper and lower bands at a distance of 2 standard deviations from the middle band. On the other hand, the middle band of Keltner channel calculation is based on a 20-period exponential moving average, where the upper and lower channels are drawn at an equal distance from an Average True Range value multiplier. Unlike the Average True Range used in the Keltner channel, the standard deviation value of the Bollinger Band does not represent an average, and it creates more sharp edges on the chart. Hence, some Forex traders prefer the Keltner channel over the Bollinger Band, as it draws smoother channels that can sometimes offer higher quality signals.

Figure 2: Keltner Channels Can Provide Overall Market Outlook and Generate Trading Signals. When the upper and lower channels of the envelop family of indicators move in an upward direction where the price continuously trades near the upper channel, Forex traders interpret this signal as an upward trending market condition. By contrast, when the channels are moving in a downward direction and the price continuously trades near the lower channel, the market is considered to be a downward trending market condition. However, when the Keltner channels remain flat, and the price starts bouncing between the upper and lower channels without showing any directional tendency, Forex traders consider such market condition as a consolidating or range bound market. Currency price movements can typically stall and even tend to range for a brief period of time during uptrends and downtrends. During minor pullbacks that resume the prevailing trend, envelop based technical indicators help Forex traders recognize entry opportunities to add new or additional positions in the direction of the underlying trend. Many times, you can quickly identify if the market is in an uptrend or downtrend, or consolidating within a range just by taking a look at the Keltner channels. Then depending on the underlying conditions, you would incorporate a Keltner channel trading strategy best suited for the particular market situation. As discussed earlier, the upper and lower Keltner channels are always plotted at an equal distance from the 20-period Exponential Moving Average. As these channel extremes represent a multiplier of the average volatility of the currency pair, when the price goes above or below the Keltner channels, it signifies that the market is trading outside of the average or normal price range. Forex traders can interpret such a market condition as a signal of a reversing trend or the start of a new trend depending on the price action and momentum around these dynamic SR levels. However, if the Keltner channels remain flat and the price trades within the upper and lower bands of the Keltner channels without penetrating above or below, it signifies that the market is range bound. One of the best aspects of the Keltner channel is that it not only provides traders with an overall technical market outlook about the on-going trend, but it can also signal a potential trend reversal when the price reverses and crosses the opposite channel.

Using a Keltner channel strategy, you can generate actionable entry and exit trade signals that can offer a solid reward to risk ratio. Examples of Trading Forex with a Keltner Channel Strategy. Many experienced FX traders prefer to combine multiple uncorrelated technical signals to confirm the trend before placing their live trade orders. When you are trading with a Keltner channel strategy, you should try to apply an additional technical indicator to bolster the strength of the Keltner signal. In the following three examples, we will discuss how you can trade three different market conditions by combining a second technical indicator and build a comprehensive Keltner channel trading system. Example of Using Keltner Channel for Trading Breakouts. One of the best applications of Keltner channel in Forex is using the indicator to trade breakouts. Breakouts occur when the price ends a previous consolidation and starts a new trend. However, if you only rely on the Keltner channel to trade breakouts, you may find that you are seeing a lot of false signals.

The best way to trade a breakout scenario with the Keltner channel would be to combine a trend signal indicator like the Average Directional Index (ADX). Figure 3 : Trading Breakouts with Keltner Channel and Average Directional Index. In figure 3, the EURUSD price first broke out of the upper Keltner channel, which signaled that the previous consolidation period may have come to an end. However, savvy Forex traders would not merely place a BUY order at this point because the Average Directional Index indicator value (Blue line) was still below the reading of 25. Many experienced Forex traders only consider a market to be trending when the Average Directional Index reading is above 20 to 25, and where the trend intensifies when the ADX indicator reading goes above 40 to 45 level. Hence, once the Average Directional Index reading reached above the 25 level, then you could have considered placing the BUY order with your broker. The trickiest part of trading breakouts using a Keltner channel strategy is to know exactly when you should time your market entry. You should try to identify a psychological resistance level during an uptrend and a support level during a downtrend, once the following two conditions are met. The price has penetrated and closed above the Upper channel or closed below the lower channel and started an uptrend or downtrend. Average Directional Index confirms the start of the trend by showing a reading above 25. On this occasion, we found the resistance to be around the 1.0935 level. If you had placed a BUY order once the EURUSD price penetrated above the 1.0935 level, this trade would have proved to be a winner. Example of Using Keltner Channel to Trade Retracement Pullbacks. Aside from breakout opportunities, the Keltner channel can also provide you with retracement signals. Moreover, if you are already in the trade, you can also use these retracement pullback opportunities to increase your position size. Figure 4: Trading Pullbacks with Keltner Channel and Stochastic Divergence. In figure 4, we have applied the Stochastic indicator in combination with Keltner channel to find a retracement pullback trading opportunity. To trade using this strategy, first, you need to wait for the price to confirm the trend by breaking above or below the upper or lower Keltner channel. On this instance, the GBPUSD price broke below the lower Keltner channel and signaled a downtrend. Once the trend is confirmed, you should wait for the price to start a retracement and reach near the middle band of the Keltner channel, which is the 20-period Exponential Moving Average.

The price can retrace back and reach all the way to opposite Keltner channel as well at times. The key here is that the price cannot break and close on the other side of the Keltner channel, which would signal a potential reversal of the trade. The third thing you need to watch in this pullback strategy is the Stochastic indicator reading to gauge when the market is overbought or oversold. Here, the price reached near the middle band of the Keltner channel and the Stochastic indicator turned overbought, signaling a potential trend continuation to the downside. In addition to that, we also found a stochastic divergence on the price chart, which significantly improved the odds of the trade. However, it is not necessary that you wait for a stochastic divergence to use this Keltner channel strategy. A stochastic overbought signal during a confirmed downtrend would be sufficient to confirm a potential trend continuation. The trigger for this Keltner channel pullback strategy is a price penetration below the low of the bar that signaled the stochastic overbought condition. As you can see, we have identified this particular bar with the black arrow on figure 4. If you have placed a SELL order as soon as the GBPUSD price penetrated below the low of this bar, this trade would have yielded some handsome profits. Example of Using Keltner Channel During a Range Bound Market.

Besides trending markets, if you are looking to trade during a range bound market, you can still utilize the Keltner channel and Average Directional Index combination. The beautiful thing about combining these two indicators is that during a consolidation period, the upper and lower Keltner channels will act as resistance and support, where the Average Directional Index will confirm if the market is ranging or a new trend is likely to take place. Figure 5: Trading a Ranging Market with Keltner Channel, Average Directional Index, and Price Action Bars. On figure 5, you can see that the GBPUSD price was trading sideways and the Keltner channels acted as support and resistance levels. As the Average Directional Index indicator reading remained below the 25 level, it confirmed that there is no underlying directional movement or trend in the market. Such market condition constituted a textbook sideways or ranging market, and it provided a trade opportunity if you knew how to read price action bars. On two occasions, the GBPUSD produced two bullish pin bars after coming close to the lower Keltner channel, which acted as support. Moreover, the GBPUSD formed a bearish outside bar after coming close to the upper Keltner channel, which acted as resistance. If you had placed an order when the GBPUSD price broke these three price action bars, as identified with red arrows in figure 5, at least the first two out of three of these trades would have turned out to be profitable. Like other envelop based technical indicators, Keltner channel has its positive points and shortcomings. However, if you spend some time understanding the formula behind the indicator and combine it with other technical indicators to develop a trading strategy fit for different market conditions, such trading systems can generate positive returns to your bottom line. It is worth noting that as of this writing, the popular Forex charting software MetaTrader 4 platform does not include any built-in indicator for plotting the Keltner channels. In order to draw mt4 Keltner channel, you can opt to download a third-party developed Keltner channel indicator. There are several versions of the Keltner channel indicator readily available for downloading at the official forum of MetaTrader 4 platform, the MQL4 Programming Forum. Furthermore, you can also search for a custom Keltner channel indicator at various popular Forex forums, such as on ForexFactory forums.

Take Your Trading to the Next Level, Accelerate Your Learning Curve with my Free Forex Training Program.



Articles:

  • Strategy forex filetype pdf